Water Turbine Generator/Francis Water Turbine/Mini Hydro Turbine
1. Brief Introduction
Francis turbines may be designed for a wide range of heads and
flows. This, along with their high efficiency, has made them the
most widely used turbine in the world. In contrast to the Pelton turbine, the Francis turbine operates at
its best completely filled with water at all times. The turbine and
the outlet channel may be placed lower than the lake or sea level
outside, reducing the tendency for cavitation.
In addition to electrical production, they may also be used for
pumped storage, where a reservoir is filled by the turbine (acting
as a pump) driven by the generator acting as a large electrical
motor during periods of low power demand, and then reversed and
used to generate power during peak demand. These pump storage
reservoirs act as large energy storage sources to store "excess"
electrical energy in the form of water in elevated reservoirs.
2. Product Paramenters
| Water Head | 25m-300m |
| Runner Diameters | 0.45m-5m |
| Power Range | 100KW to 70MW |
| Frequency | 50HZ/60HZ |
| Generator Voltage | 400V, 800V, 6300V, 10500V |
| Layout pattern | Horizontal or Vertical |
| Material(blades) | Stainless Steel ZG0Cr13Ni4Mo |
| Excitation | Brushless or Static excitation system |
| Generator Insulation | F/F |
| Lifespan | 30~50 years |
| Manufacturer | Deyang Dongsen Hydropower Equipment Co., Ltd. |
3. Our advantages
1) Provide complete proposal for hydro power plant from water to
wire
2) Abundant foreign power plant project implementation experience
3) Design and manufacture of hydro power generator with voltage
400V, 3.3KV, 6.3KV, or 10.5KV AC three phase
4. FAQ
1) Payment terms
L/C, 30% T/T in advance. or T/T
2) Delivery period
Normally 6-8 months after confirmation of orders.
3) Package
We will use wooden box and plastic film to protect the products.
