RS485 Communication Interface Hydro Turbine Governor for Efficient
Power Generation
Product Description:
Hydraulic Turbine Speed Governor is a type of turbine regulator
designed to control the speed of a turbine generator. It is
equipped with a 4-20mA input signal, and can operate within a
temperature range of -20 to +50℃, as well as a frequency range of
50-60 Hz. Furthermore, the governor provides an output signal of
0-10V for control purposes. The product is designed for use in
hydraulic turbines, and its precise control system provides
excellent speed regulation, making it suitable for applications
requiring high efficiency. In addition, the governor is robust and
reliable, making it ideal for long term use.
Features:
- Product Name: Hydro Turbine Governor
- Type: Hydraulic Turbine Regulator
- Communication Interface: RS485
- Control Mode: Electronic
- Power Range: 0.5-50 MW
- Protection Level: IP54
- Hydraulic Turbine Speed Regulator
- Hydraulic Turbine Regulator System
Technical Parameters:
| Product Name | Hydro Turbine Governor |
|---|
| Operating Temperature | -20 To +50℃ |
| Output Signal | 0-10V |
| Display | LED |
| Power Range | 0.5-50 MW |
| Communication Interface | RS485 |
| Frequency Range | 50-60 Hz |
| Type | Hydraulic |
| Protection Level | IP54 |
| Control Mode | Electronic |
| Special Features | Hydro Power Turbine Governor, Hydraulic Turbine Speed Regulator,
Hydro Turbine Governor Controller |
Applications:
Hydraulic Turbine Regulator, otherwise known as Hydro Turbine
Governor System or Hydro Turbine Governor Controller, is an
essential piece of equipment for any hydroelectric power station.
The DSSD TSQ1101 model is designed and manufactured in China,
certified with ISO and supplied with a wooden box. With timely
delivery within 60-120days and payment accepted by T/T, 500 sets of
this model are available for purchase. It has a wide frequency
range of 50-60 Hz and is designed to be electronically controlled,
with a voltage range of 220-440V and an IP54 protection level.
Furthermore, it is equipped with RS485 communication interface for
improved efficiency.
Customization:
Hydro Turbine Governor
The Hydro Turbine Governor is a hydraulic turbine regulator
designed to optimize the performance of hydro power turbines. It is
manufactured by DSSD and has model number TSQ1101. This product is
ISO certified and comes with a minimum order quantity of 1. It is
packed in a wooden box. Delivery time is 60-120days and payment
terms are T/T. The Hydro Turbine Governor has a supply ability of
500 sets and can operate within a temperature range of -20 To +50℃.
The speed range is 0-3000 RPM and it features electronic control
mode with an input signal of 4-20mA.
Packing and Shipping:
Hydro turbine governors must be packaged and shipped with care and
precision. All components of the governor must be packaged
separately, and extra cushioning must be used to protect the
delicate parts. Using the right packing materials and shipping
containers is essential for protecting the governor from damage
during shipment.
When packaging a hydro turbine governor, be sure to use materials
such as bubble wrap, foam, and packing peanuts. Secure the parts in
the containers with tape, and label each container with a
description of its contents. Use a sturdy shipping container with
good insulation to protect the governor from the elements.
It is also important to properly label the shipping container.
Include the destination address, contact information, and a
description of the contents. Additionally, notify the recipient
that they are receiving a hydro turbine governor. Finally, make
sure to properly secure the shipping container so that it does not
open during transit.
